хабање

хабање

Damage resulting from the removal of materials from surfaces in relative motion. Wear is generally described as:

Abrasive: Removal of materials from surfaces in relative motion by a cutting or abrasive action of a hard particle, which is usually a contaminant. : Adhesive: Removal of materials from surfaces in relative motion as a result of surface contact. Galling and scuffing are the extreme cases. : Corrosive: Removal of materials by chemical action.

0 0

향상

이미지 추가

품사: 명사
동의어:
용어블로그:
분야/도메인: 머신 공구
카테고리: 베어링
Company: Timken
제품:
두문어-약어:

자세히

내 용어집에 추가

기타 언어:

자세히

하고 싶은 말

유사 용어 보기

отпорност на хабање

머신 공구; 베어링

The ability of a rubber compound to resist mechanical wear.

отпорност на хабање

섬유 & 직물; 인조섬유

The ability of a fiber or fabric to withstand surface wear and rubbing.

заштитни омот

머신 공구; 베어링

A metal cap that fits over the outer end of the hub to keep grease in and dirt out of the bearing assembly.

толеранција

머신 공구; 베어링

1) The range between two limiting sizes as a means of specifying the degree of accuracy. 2) The amount a given bearing dimension may vary from specifications. 3) The difference ...

топлотно ширења

머신 공구; 베어링

The expansion caused by the increase in temperature. This may be linear or volumetric.

статична тачке

머신 공구; 베어링

The section of the helix seal lip incorporating the contact line.

штит

머신 공구; 베어링

A metal formed washer attached to the outer ring and set so it rides close to, but not contacting, the inner ring, to retain lubricant and prevent contamination.

оксидација

머신 공구; 베어링

This occurs when oxygen attacks petroleum fluids. The process is accelerated by heat, light, metal catalysts and the presence of water, acids, or solid contaminants. It leads to ...

뉴스 속의 용어

фармакологија

Поље медицине и биологијекоје се бави проучаванјем деловања лекова. Као лек се подразумевају сви они производи које је човек створио, природне или од ...