- 업종: Government; Transportation
- Number of terms: 1862
- Number of blossaries: 0
- Company Profile:
Iowa Department of Transportation (DOT) is the state agency responsible for the organization, construction, and maintenance of the of Iowa's highway system. Located in Ames, Iowa DOT is also responsible for licensing drivers and programming and planning for aviation, rail, and public transit.
A device at the ends of beams that is placed on top of a pier or abutment. The ends of the beam rest on the bearing.
Industry:Construction
A horizontal structure member supporting vertical loads by resisting bending. A girder is a larger beam, especially when made of multiple metal plates. The plates are usually riveted or welded together.
Industry:Construction
A cantilever bridge is a bridge built using cantilevers: structures that project horizontally into space, supported on only one end. For small footbridges, the cantilevers may be simple beams; however, large cantilever bridges designed to handle road or rail traffic use trusses built from structural steel, or box girders built from prestressed concrete. A simple cantilever span is formed by two cantilever arms extending from opposite sides of the obstacle to be crossed, meeting at the center. In a common variant, the suspended span, the cantilever arms do not meet in the center; instead, they support a central truss bridge which rests on the ends of the cantilever arms.
Industry:Construction
Cemento con barre d'acciaio o rete metallica incorporata per aumentarne la forza in tensione.
Industry:Construction
Earth, stone or other material used to raise the ground level, form an embankment or fill the inside of an abutment, pier or closed spandrel.
Industry:Construction
A total system of support for freshly placed concrete, including the mold and all supporting members, hardware, and necessary bracing. Formwork must be strong enough to support the considerable weight and pressure of wet concrete without bending or breaking.
Industry:Construction
A device connecting two or more adjacent parts of a structure. A roller joint allows adjacent parts to move controllably past one another. A rigid joint prevents adjacent parts from moving or rotating past one another.
Industry:Construction
